A vehicle scanner is a drive-through system that photographs a vehicle and assesses its condition automatically. In the InstaScan, 6 to 14 cameras take more than 300 photos as the vehicle passes through. AI marks the damage, and the InstaOne software turns the results into reports, condition reports or expert reports.
InstaScan is a permanently installed drive-through scanner, not an app. It captures the outside of the vehicle automatically, including the body, tyres (tread and sidewall), rims, underbody and glass. You record the interior separately with a mobile web app.
A scan takes 5 to 10 seconds. The vehicle drives through the scanner at a maximum speed of 8 km/h. One scanner handles up to 2,000 passages a day.
The AI detects scratches and dents from 3 mm, as well as paint chips, scuffs, damaged rims and missing parts. The average detection rate is over 80%. With the optional add-on modules, the scanner also checks tyre tread, tyre sidewalls, the underbody and the windows. The scanner does not detect mechanical faults or hidden damage.
Yes. For reliable detection, the vehicle should be clean and free of protective film and stickers.
Yes, with the optional underbody scanner. It checks the underbody and detects damage to the battery housing of electric vehicles.
That depends on the model. The InstaScan Small, 1.80 m high, is built for cars; the InstaScan Medium, 2.00 m high, for cars and SUVs; and the InstaScan Large, 3.00 m high, also for light commercial vehicles. All models have a drive-through width of 3.80 m.
The InstaScan Small and Medium are set up in one day, the InstaScan Large in two days. The scanner needs power and a broadband LAN connection with at least 40 Mbit/s upload bandwidth; LTE or 5G is optional. It works indoors and outdoors at −10 to +40 °C.
Yes. InstaOne has a REST API and can be connected to more than 30 dealer management systems or vehicle reception systems. Vehicle and order data can be retrieved from your DMS at any time. Images, damage data and reports can be sent back to your DMS if needed.
Certified expert reports can be ordered at any time on the InstaOne platform in just a few clicks. It usually takes 45 minutes to a few hours, depending on the report type (e.g. condition report, diminished value report) and expert availability. The scan images and the damage detected by the AI are available on the platform within a few minutes.
Yes. A back-office expert reviews the damage, runs a VIN lookup and a cost calculation in DAT, and then issues a report with the seal of a certified expert organisation. Hüsges is set up as the default expert. Other expert organisations such as TÜV or DEKRA can be connected through the API.
Both are possible: you buy the system, or you pay a monthly lease rate through one of Instavalo's leasing partners. Prices are available on request, because they depend on the use case, model, modules and vehicle volume.
Instavalo supplies and supports scanners in all EU countries and Switzerland, as well as in Asia and the Middle East. Instavalo is headquartered in Willich, Germany, with further offices in Munich, Paris, Brussels, Oxford, Tokyo and Sydney.